Lift and Slide – Alzante Over 92
DESCRIPTION
Lift-slide glulam consists of 4 or more solid or finger-jointed layers, both for frame and sash, glued with class D4 glue according to the requirement of the standard regulation EN204. The boards forming the laminated profile can be solid or jointed through finger-joint system depending on its field of application or the articles technical specifications.
The Over 92 system allows the construction of mobile lift & slide sash on one or two parallel tracks of 1, 2, or more sash spaced from each other about 28 mm, central section provided with special moulded profiles with brush and gasket. The internal glaze stop is available in four shapes: rounded, blunted, squared, baroque.
DIMENSIONS
Fixed frame mm 212 x 56 or 8” 11/32 x 2” 13/64.
Fixed and operable door mm 100 x 92 or 3” 15/16 x 3” 39/64, double plinth mm 179 x 92 or 7” 3/64 x 3” 39/64.
THRESHOLD DRAIN GASKET
Set of gaskets in EPDM and PVC.
Lower threshold to be chosen from basic track binary type (h=19mm)
and high thermal insulation fiberglass Climatech (h=25mm)
OPERATING DEVICES
The hardware consists of top and bottom rails in which run wheeled trolleys fitted on ball bearings with a standard load capacity of 300 kg, or strengthened with load capacity up to 400 kg. The movement of the sash doors is operated through a leverage system which allow through the rotation of the handle such as to enable the leaf lifting and sliding. The closure is ensured by locking devices located in vertical and horizontal side matching the mobile leaf.
INSULATED GLASS
Triple glazing double chamber, low emission glass type plus gas argon and aluminum spacer or on request “warm edge”;
internal and/or external glass sheets, tempered or stratified as per minimum requirements set by the standards UNI 7697:2015.
WOOD PROTECTION
Surface treatment of the wood with acrylic based resins in water emulsion; the application cycle varies from three to six layers depending on the finish and the duration requested.