Lift and Slide Doors in PVC – Synego 80
DESCRIPTION
Lift-slide made with “Rehau” PVC profile with 5 chambers, strengthened with steel profiles; glazing bead can be chosen among two different shapes: rounded or squared.
DIMENSIONS
Fixed frame mm 190 x 63 or 7” 31/64 x 2” 15/32.
Fixed and mobile door mm 101 x 80 or 3” 31/32 x 3” 9/64.
THRESHOLD DRAINING GASKET
Set of gaskets in PVC and central section with PVC clamps and brush. Threshold in aluminum with polyamide thermal break (h=25mm).
OPERATING DEVICES
The hardware consists of top and bottom rails in which run wheeled trolleys fitted on ball bearings with a standard load capacity of 300 kg. The movement of the sash doors is operated through a leverage system which allow through the rotation of the handle such as to enable the leaf lifting and sliding.The closure is ensured by locking devices located in vertical and horizontal side matching the mobile sash.
INSULATED GLASS
Double glazing single chamber, low emission glass type plus gas argon and warm edge spacer. internal and/or external glass sheets, tempered or stratified as per minimum requirements set by the standards UNI 7697:2015; it is possible to insert triple pane with double chamber with a thickness that does not exceed 36mm.
FINISHING
The profiles can be mass colored or film coated, the coating of the profiles surface is obtained through hot gluing of an acrylic film resistant to sunlight and abrasion, these films can be in Ral color or wood decoration.