Overles manufacture and commercialize windows, doors and sliding doors in wood, wood aluminum, wood bronze, aluminum, and PVC for the residential and commercial construction, shutters, security systems, amour plated doors, entry doors and exterior structures


WINDOWS IN WOOD – Over 68 Barocco

Engineered profile consists of 3 or more finger-jointed layers, both for frame and sash, glued with class D4 glue according to standard regulation EN204.
The boards forming the laminated profile can be solid or jointed through finger-joint system depending on its application or specifications requirements.

Fixed engineered frame nominal section mm 68 x 82 or 2” 43/64 x 3” 7/32.
Operable engineered door nominal section mm 68 x 79 or 2” 43/64 x 3” 7/64.

Triple stop profile hold, double gasket on sash, on request third gasket on frame; glass Stop can be chosen among different shapes: rounded, squared, blunt, baroque; aluminum or wood drainer on window Anodized aluminum and polyamide thermal break threshold (h=25mm or 1 Inch) on french door.

Supporting and closing hardware in anti-corrosive steel in normal conditions of use, applied in “ 12 mm space” is composed of a corner hinge with micrometric regulation in the three directions, stopping-cams with multiple closure points self-adjusting and respective safety encounters, single lever latch on double-sash; standard tilt and turn opening complete with safety device and micro-ventilation device operable with a 45° handle position.

Dual pane, single chamber, low-e glass with Argon and aluminum spacer or on request “warm edge”; interior and/or exterior glass sheets, tempered or laminated as per standards UNI 7697:2015; it is possible to insert triple pane with double chamber with a thickness that does not exceed 34mm.

surface treatment of the wood with acrylic based resins in water emulsion; the application cycle varies from three to six layers depending on the finish and the duration requested.