WINDOWS IN WOOD – Over 92
Engineered profile consists of 4 or more solid or finger-jointed layers, both for frame and sash, glued with class D4 glue according to standard regulation EN204.
The boards forming the engineered profile can be solid or jointed through finger-joint system depending on its field of application or technical specifications.
Fixed engineered frame, nominal section mm 92 x 79 or 3” 39/64 x 3” 7/64.
Operable engineered door nominal section mm 92 x 79 or 3” 39/64 x 3” 7/64.
THRESHOLD DRAINING GASKET
Triple stop profile hold, double gasket on sash, on request third gasket on frame; glass Stop can be chosen among different shapes: rounded, squared, blunt, baroque; aluminum or wood drainer on window Anodized aluminum and polyamide thermal break threshold (h=25mm or 1 Inch) on french door.
Supporting and closing hardware in anti-corrosive steel in normal conditions of use, applied in “ 12 mm space” is composed of a corner hinge with micrometric regulation in the three directions, stopping-cams with multiple closure points self-adjusting and respective safety encounters, single lever latch on double-sash; standard tilt and turn opening complete with safety device and micro-ventilation device operable with a 45° handle position.
Triple glazing double chamber, low-e glass with argon gas filling and aluminum spacer or on request “warm edge”; interior and/or exterior glass sheets, tempered or laminated as per minimum requirements set by the standards UNI 7697:2015;.
Surface treatment of the wood with acrylic based resins in water emulsion; the application cycle varies from three to six layers depending on the finish and the duration requested.